reverse pa
NSFW Tumblr
find reverse pa on porn pin board
reverse pa clips
“Hned si padli do oka pÅ™i prvnÃm setkánÃ, obÄ›ma srÅ¡elo1 z oÄà pusté mrdánÃ…â€(â€They fell for each other on their first meeting and they were both eager to fuckâ€)Only few people know that this Czech “porn-folk†song by songwri
Good to see a procedure of a reverse pa. However it looks a little shallow compared to mine.
henrysjoy: proudonmyownpa: Many thanks to bara for submitting a series of a wonderful pierced dick !!! ‘getting there’ Pretty impressive Reverse PA.
What it all looks like without the jewelry. Not that it matters because there’s not enough skin to support a PA. As a result, I’ll either heal and repierce farther down or maybe go with a reverse PA…
View of my Reverse PA; swapped out the apadravya for the reverse PA to stop pissing all over my balls. The apadravya directed the piss at a 90 degree angle and was getting annoying. Now I can piss standing up again!
Reverse PA–8 gauge 5/8" curved barbell.
Cumming with an 8 gauge Reverse PA.
So, it’s been two years since I began this blog. I started with a small weighted leather stretcher and no holes. Now my sac is being stretched by the weight of 3 6 gauge straight barbells and I’m on my 2nd penis piercing. How far I’ve
My current 8 gauge curved barbell Reverse PA, along with a 2" weighted ball stretcher. I can’t wait to swap out the straight 6 gauge barbells in my sac with circular 4 gauge barbells!
Just swapped an 8 gauge 7/8" curved barbell for an 8 gauge ½" screw-on ball ring. I like the way it rides better.
My new tattoo. It’s a radiator cap from a vintage automobile, symbolizing speed with style. Love the car, love the symbol.
Thinking about my new tattoo seems to help me get really hard…
With the 1" steel ball, my sac hangs real low when it’s relaxed. It also feels great swinging around when I walk.
Working on stretching my 6 gauge ladder into a 4 gauge ladder with three 1" weight balls. The weight’s awesome, and the noise when I walk very stimulating!
Cumming with a screw-on ball ring and 1" ball weight.
More shots of the three 1" ball weights in my Cocksox.
8 gauge reverse PA with a 6 gauge weight ring through the first ladder piercing.
8 gauge circular barbell Reverse PA, two 6 gauge 5/8" circular barbells and a 4 gauge ¾" screw-on ball ring (used in my late PA).
Stretching with a 1" ball weight.
Feelin’ the weight–two 1" ball weight rings and a 4 gauge screw-on ball ring. Makes lots of good noise, too.
Weighted down while stretching my piercings.
Feelin’ good, with a couple of ball weights.
Screw-on ball Reverse PA and a pair of weight balls, which make a great noise banging together.
Great week! Although one of my scrotal piercings had to be retired (it just gave way and couldn’t support jewelry), I got two more additions to my ladder. I also swapped one of the 6 gauge circular barbells for a 4 gauge screw-on ball ring,
6 gauge circular barbell Reverse PA, and a scrotal ladder of a 6 gauge circular barbell, a 4 gauge screw-on ball ring and two 6 gauge straight barbells. Can’t wait for the new piercings with the straight barbells to heal so I can swap them out
6 gauge ½" curved barbell with a ½" ball resting on top of my reverse PA; no to mention the 4 gauge circular barbell, 4 gauge screw-on ball ring, and two 6 gauge straight barbells. However, there’s one problem–my
What Cocksox look like with a 6 gauge 1/2” curved barbell with a 1/2” ball resting on top of my reverse PA; no to mention the 4 gauge circular barbell, 4 gauge screw-on ball ring, and two 6 gauge straight barbells. The pouch holds all that metal
The ½" ball on top of the curved barbell Reverse PA adds some nice heft my cock.
In these photos, you can really see the ½" ball on my Reverse PA, as well as the balls on 4 gauge circular barbell and 4 gauge screw-on ball ring in my sac.
6 gauge Reverse PA with a ½" ball, two 6 gauge straight barbells and one 4 gauge screw-on ball ring and one 4 gauge circular barbell. Working on upgrading the stright barbells to circular ones in a few months after they’ve healed comple
Just a relaxing Saturday cumming…
Kinda lumpy wearing this thong with a 6 gauge Reverse PA, two 4 gauge rings and two 6 gauge straight barbells.
00 gauge curved barbell with a ¾" ball. I’d love to fit something like this in my reverse PA.
Showing off my barely-noticeable new 4 gauge ½" straight barbell Reverse PA. Since I have a partial meatotomy, one ball sits inside my urethra. It’s much more comfortable than the longer jewelry I’ve been wearing.
Hangin’ low.
John SIevers briefs do a nice job of softly cradling my Reverse PA and scrotal ladder. You can see the outlines of the 2 circular barbells and 2 screw-on ball rings. This should help stretch the holes so I can fit larger jewelry.
Six-step scrotal ladder; with more rungs and heavier rings it will be awesome!
Swapped out the two straight barbells for circulars. Now I’ve got a real ladder, and it it feels that way, too!
Some different shots of my scrotal ladder and Reverse PA.
Reverse PA and scrotal ladder.
Tried a ring again in my Reverse PA. Just not as comfortable as my ¼" long straight barbell…
Hidden under my Cocksox are a 4 gauge Reverse PA, two 2 gauge screw-on ball rings, 2 1 gauge screw-on ball rings, one 2 gauge circular barbell, one 2 gauge screw-on ball ring, one 4 gauge circular barbell, and one 4 gauge screw-on ball ring. Plenty
Different views of my 8-step scrotal ladder and Reverse PA. The ladder’s fitted with larger-gauge jewelry that tugs my scrotum downward and makes fantastic noise when moving rapidly; like in and out…
Some shots of my current adornment. The smallest gauge is 4, so the weight is very comfortable when my scrotum’s as relaxed as in the bottom photo. Love it!
My new pubic piercing sports a rather small 10 gauge 3/4″ surface bar, to complement my 4 gauge 1/4″ Reverse PA and my scrotal ladder (two 1 gauge 5/8″ screw-on ball rings, two 1 gauge 5/8″ tribal dream rings, one 2 gauge 3/4″ circular barbell,
Metal in a mesh Cocksock.
Different views of my scrotal ladder, made up of 2 1 gauge tribal dream rings, 1 0 gauge circular barbell, 1 0 gauge screw-on ball ring, 2 1 gauge screw-on ball rings, 1 2 gauge circular barbell, and 1 2 gauge screw-on ball ring. Very pleasing heft
Same views as earlier, but with briefs to support the weight of the metal. The only downside is that the metal can’t play any tunes while imprisoned like this…
Cocksox with a heavy load of metal. Unfortunately, there’s really not enough room for 8 pieces of stainless steel jewelry in the pouch. Oh well, it’s fun anyway…
Just getting hard with my scrotal ladder. Feels great to be wearing all this metal!
e More views of my scrotal ladder. It adds a whole other dimension to a swinging sac…
Hangin’ loose…
Scrotal jewelry set off my a hard-on.
Reverse PA and scrotal ladder as seen through Cocksox mesh briefs.
My scrotal ladder contained within a pair of John Sievers briefs. The pouch makes wearing all this heavy jewelry really comfortable–and quiet. Great for work when you’ve got this many piercings!
Different views of my current scrotal ladder and Reverse PA. Heavy metal that’s really pleasure to listen to! Nothing head-banging here, just a gentle chorus of jingling, clinking stainless steel.
Added two more steps (6 gauge straight barbells) to my scrotal ladder–at 10 now. As soon as I can, I’ll replace the straight barbells with curved ones for additional weight and more jingling noises.
Scrotal ladder views as well as a peek of my new tattoo.
Heavy metal–10 rings, ranging from 6 gauge all the way up to 00 gauge. Feeling them slap against my legs as I walk around is fantastic, and noise as my sac slaps against my wife’s ass is wonderful!
apadravya-piercing: “2 pa holes and a reverse pa 46 oz ball stretcher on my 8.5” cut thick cock.“Thanks for the submission, baxterxlt, because the view from here is impressive!! And love the male nipple piercing, too!
